网站建设的策划书小程序介绍怎么写吸引人

网站建设的策划书,小程序介绍怎么写吸引人,数据分析网站html模板下载,微信小程序商城需要多少钱STM32学习_OLED简介 在嵌入式开发中#xff0c;OLED显示屏绝对是新手入门和项目实战的“常客”#xff0c;尤其是搭配STM32、51单片机的0.96寸小屏#xff0c;凭借小巧、清晰、易驱动的特点#xff0c;成了很多开发者的首选。今天就简单聊聊这款实用的显示模块。 一、什么是…STM32学习_OLED简介在嵌入式开发中OLED显示屏绝对是新手入门和项目实战的“常客”尤其是搭配STM32、51单片机的0.96寸小屏凭借小巧、清晰、易驱动的特点成了很多开发者的首选。今天就简单聊聊这款实用的显示模块。一、什么是OLED显示屏OLEDOrganic Light-Emitting Diode即有机发光二极管核心特点是自发光——每个像素点都能独立发光无需像LCD那样依赖背光板。这也是它和传统LCD最本质的区别。二、嵌入式开发中最常用的OLED类型新手接触最多的是0.96寸OLED模块主要分两种通信方式I2C接口版仅需4根线VCC、GND、SDA、SCL即可通信接线简单新手友好缺点是速度稍慢SPI接口版需要6~7根线通信速度更快适合需要快速刷新画面的场景。此外这类模块的分辨率多为128×64128列、64行能满足字符、数字、简单图形的显示需求。三、OLED的核心优势为啥嵌入式开发偏爱它显示效果好对比度极高黑色纯粹视角几乎达到180°低光环境下也清晰可见功耗低自发光特性使得仅点亮的像素消耗电能静态显示时功耗远低于LCD体积小、易驱动模块集成了驱动芯片如SSD1306单片机只需通过I2C/SPI发送指令即可控制无需复杂的时序处理。四、STM32使用小Tips对于STM32开发者尤其是用F103C8T6的新手OLED的使用门槛很低只需初始化I2C/SPI对应的GPIO引脚移植现成的SSD1306驱动库标准库/HAL库都有成熟实现调用库函数即可实现字符、数字、点阵图的显示甚至简单的动画。五、应用场景小尺寸OLED常被用于智能手环、便携式检测仪、开发板调试显示、智能家居控制面板等场景是嵌入式项目中实现“可视化”的首选方案。简单来说OLED显示屏就是嵌入式开发中“小巧而强大”的存在上手快、效果好是新手练手的绝佳模块~main.c 主函数代码#includestm32f10x.h// Device header#includeDelay.h#includeOLED.hintmain(void){OLED_Init();OLED_ShowChar(1,1,A);OLED_ShowString(1,3,HelloWorld);OLED_ShowNum(2,1,12345,5);OLED_ShowSignedNum(2,7,-66,2);OLED_ShowHexNum(3,1,0xAA55,4);OLED_ShowBinNum(4,1,0xAA55,16);//OLED_Clear();while(1){}}文件路径C:\Users\Admin\Desktop\文件\STM32\程序源码\STM32Project-有注释版\1-4 OLED驱动函数模块\4针脚I2C版本STM32学习_OLED显示汉字取模软件链接https://pan.baidu.com/s/1sIu0_3q6so09Cu39xfaaIg?pwd1234提取码1234–来自百度网盘超级会员V2的分享main.c 代码如下#includestm32f10x.h// Device header#includeDelay.h#includeOLED.hintmain(){OLED_Init();OLED_ShowChar(1,1,A);//显示字符OLED_ShowString(1,5,Hello);//显示字符串//最后一个参数是显示长度//小于最高位就依次没有大于最高位补0OLED_ShowNum(2,1,12345,5);//显示无符号数OLED_ShowSignedNum(2,7,66,2);//显示符号OLED_ShowSignedNum(2,12,-66,2);//显示符号OLED_ShowHexNum(3,1,0xAA55,4);//显示16进制的数OLED_ShowCHinese(6,0,0);//杭OLED_ShowCHinese(6,16,1);//州// 测试用例0.96显示屏(128 X 64) 最多显示4行汉子(0行开始)每个汉字位宽/高均为16像素//OLED_ShowCHinese(0, 0, 0);//OLED_ShowCHinese(2, 32, 0);//OLED_ShowCHinese(4, 0, 0); //杭//OLED_ShowCHinese(6, 16, 1); //州while(1){}}OLED.c 代码如下#includestm32f10x.h#includeOLED_Font.h/*引脚配置*/#defineOLED_W_SCL(x)GPIO_WriteBit(GPIOB,GPIO_Pin_8,(BitAction)(x))#defineOLED_W_SDA(x)GPIO_WriteBit(GPIOB,GPIO_Pin_9,(BitAction)(x))/*引脚初始化*/voidOLED_I2C_Init(void){RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE);GPIO_InitTypeDef GPIO_InitStructure;GPIO_InitStructure.GPIO_ModeGPIO_Mode_Out_OD;//开漏输出GPIO_InitStructure.GPIO_SpeedGPIO_Speed_50MHz;GPIO_InitStructure.GPIO_PinGPIO_Pin_8;GPIO_Init(GPIOB,GPIO_InitStructure);GPIO_InitStructure.GPIO_PinGPIO_Pin_9;GPIO_Init(GPIOB,GPIO_InitStructure);OLED_W_SCL(1);OLED_W_SDA(1);}/** * brief I2C开始 * param 无 * retval 无 */voidOLED_I2C_Start(void){OLED_W_SDA(1);OLED_W_SCL(1);OLED_W_SDA(0);OLED_W_SCL(0);}/** * brief I2C停止 * param 无 * retval 无 */voidOLED_I2C_Stop(void){OLED_W_SDA(0);OLED_W_SCL(1);OLED_W_SDA(1);}/** * brief I2C发送一个字节 * param Byte 要发送的一个字节 * retval 无 */voidOLED_I2C_SendByte(uint8_tByte){uint8_ti;for(i0;i8;i){OLED_W_SDA(Byte(0x80i));OLED_W_SCL(1);OLED_W_SCL(0);}OLED_W_SCL(1);//额外的一个时钟不处理应答信号OLED_W_SCL(0);}/** * brief OLED写命令 * param Command 要写入的命令 * retval 无 */voidOLED_WriteCommand(uint8_tCommand){OLED_I2C_Start();OLED_I2C_SendByte(0x78);//从机地址OLED_I2C_SendByte(0x00);//写命令OLED_I2C_SendByte(Command);OLED_I2C_Stop();}/** * brief OLED写数据 * param Data 要写入的数据 * retval 无 */voidOLED_WriteData(uint8_tData){OLED_I2C_Start();OLED_I2C_SendByte(0x78);//从机地址OLED_I2C_SendByte(0x40);//写数据OLED_I2C_SendByte(Data);OLED_I2C_Stop();}/** * brief OLED设置光标位置 * param Y 以左上角为原点向下方向的坐标范围0~7 * param X 以左上角为原点向右方向的坐标范围0~127 * retval 无 */voidOLED_SetCursor(uint8_tY,uint8_tX){OLED_WriteCommand(0xB0|Y);//设置Y位置OLED_WriteCommand(0x10|((X0xF0)4));//设置X位置低4位OLED_WriteCommand(0x00|(X0x0F));//设置X位置高4位}/** * brief OLED清屏 * param 无 * retval 无 */voidOLED_Clear(void){uint8_ti,j;for(j0;j8;j){OLED_SetCursor(j,0);for(i0;i128;i){OLED_WriteData(0x00);}}}/** * brief OLED显示一个字符 * param Line 行位置范围1~4 * param Column 列位置范围1~16 * param Char 要显示的一个字符范围ASCII可见字符 * retval 无 */voidOLED_ShowChar(uint8_tLine,uint8_tColumn,charChar){uint8_ti;OLED_SetCursor((Line-1)*2,(Column-1)*8);//设置光标位置在上半部分for(i0;i8;i){OLED_WriteData(OLED_F8x16[Char- ][i]);//显示上半部分内容}OLED_SetCursor((Line-1)*21,(Column-1)*8);//设置光标位置在下半部分for(i0;i8;i){OLED_WriteData(OLED_F8x16[Char- ][i8]);//显示下半部分内容}}/** * brief OLED显示字符串 * param Line 起始行位置范围1~4 * param Column 起始列位置范围1~16 * param String 要显示的字符串范围ASCII可见字符 * retval 无 */voidOLED_ShowString(uint8_tLine,uint8_tColumn,char*String){uint8_ti;for(i0;String[i]!\0;i){OLED_ShowChar(Line,Columni,String[i]);}}/** * brief OLED次方函数 * retval 返回值等于X的Y次方 */uint32_tOLED_Pow(uint32_tX,uint32_tY){uint32_tResult1;while(Y--){Result*X;}returnResult;}/** * brief OLED显示数字十进制正数 * param Line 起始行位置范围1~4 * param Column 起始列位置范围1~16 * param Number 要显示的数字范围0~4294967295 * param Length 要显示数字的长度范围1~10 * retval 无 */voidOLED_ShowNum(uint8_tLine,uint8_tColumn,uint32_tNumber,uint8_tLength){uint8_ti;for(i0;iLength;i){OLED_ShowChar(Line,Columni,Number/OLED_Pow(10,Length-i-1)%100);}}/** * brief OLED显示数字十进制带符号数 * param Line 起始行位置范围1~4 * param Column 起始列位置范围1~16 * param Number 要显示的数字范围-2147483648~2147483647 * param Length 要显示数字的长度范围1~10 * retval 无 */voidOLED_ShowSignedNum(uint8_tLine,uint8_tColumn,int32_tNumber,uint8_tLength){uint8_ti;uint32_tNumber1;if(Number0){OLED_ShowChar(Line,Column,);Number1Number;}else{OLED_ShowChar(Line,Column,-);Number1-Number;}for(i0;iLength;i){OLED_ShowChar(Line,Columni1,Number1/OLED_Pow(10,Length-i-1)%100);}}/** * brief OLED显示数字十六进制正数 * param Line 起始行位置范围1~4 * param Column 起始列位置范围1~16 * param Number 要显示的数字范围0~0xFFFFFFFF * param Length 要显示数字的长度范围1~8 * retval 无 */voidOLED_ShowHexNum(uint8_tLine,uint8_tColumn,uint32_tNumber,uint8_tLength){uint8_ti,SingleNumber;for(i0;iLength;i){SingleNumberNumber/OLED_Pow(16,Length-i-1)%16;if(SingleNumber10){OLED_ShowChar(Line,Columni,SingleNumber0);}else{OLED_ShowChar(Line,Columni,SingleNumber-10A);}}}/** * brief OLED显示数字二进制正数 * param Line 起始行位置范围1~4 * param Column 起始列位置范围1~16 * param Number 要显示的数字范围0~1111 1111 1111 1111 * param Length 要显示数字的长度范围1~16 * retval 无 */voidOLED_ShowBinNum(uint8_tLine,uint8_tColumn,uint32_tNumber,uint8_tLength){uint8_ti;for(i0;iLength;i){OLED_ShowChar(Line,Columni,Number/OLED_Pow(2,Length-i-1)%20);}}/********************************** 显示一个文字 输入数据 x----行 y----列 no----字库数组文字对应的位置 **********************************/voidOLED_ShowCHinese(u8 x,u8 y,u8 no){u8 t,adder0;OLED_SetCursor(x,y);for(t0;t16;t){OLED_WriteData(Hzk[2*no][t]);adder1;}OLED_SetCursor(x1,y);for(t0;t16;t){OLED_WriteData(Hzk[2*no1][t]);adder1;}}/** * brief OLED初始化 * param 无 * retval 无 */voidOLED_Init(void){uint32_ti,j;for(i0;i1000;i)//上电延时{for(j0;j1000;j);}OLED_I2C_Init();//端口初始化OLED_WriteCommand(0xAE);//关闭显示OLED_WriteCommand(0xD5);//设置显示时钟分频比/振荡器频率OLED_WriteCommand(0x80);OLED_WriteCommand(0xA8);//设置多路复用率OLED_WriteCommand(0x3F);OLED_WriteCommand(0xD3);//设置显示偏移OLED_WriteCommand(0x00);OLED_WriteCommand(0x40);//设置显示开始行OLED_WriteCommand(0xA1);//设置左右方向0xA1正常 0xA0左右反置OLED_WriteCommand(0xC8);//设置上下方向0xC8正常 0xC0上下反置OLED_WriteCommand(0xDA);//设置COM引脚硬件配置OLED_WriteCommand(0x12);OLED_WriteCommand(0x81);//设置对比度控制OLED_WriteCommand(0xCF);OLED_WriteCommand(0xD9);//设置预充电周期OLED_WriteCommand(0xF1);OLED_WriteCommand(0xDB);//设置VCOMH取消选择级别OLED_WriteCommand(0x30);OLED_WriteCommand(0xA4);//设置整个显示打开/关闭OLED_WriteCommand(0xA6);//设置正常/倒转显示OLED_WriteCommand(0x8D);//设置充电泵OLED_WriteCommand(0x14);OLED_WriteCommand(0xAF);//开启显示OLED_Clear();//OLED清屏}OLED.h 代码如下#ifndef__OLED_H#define__OLED_H#includestm32f10x.h// Device headervoidOLED_Init(void);voidOLED_Clear(void);voidOLED_ShowChar(uint8_tLine,uint8_tColumn,charChar);voidOLED_ShowString(uint8_tLine,uint8_tColumn,char*String);voidOLED_ShowNum(uint8_tLine,uint8_tColumn,uint32_tNumber,uint8_tLength);voidOLED_ShowSignedNum(uint8_tLine,uint8_tColumn,int32_tNumber,uint8_tLength);voidOLED_ShowHexNum(uint8_tLine,uint8_tColumn,uint32_tNumber,uint8_tLength);voidOLED_ShowBinNum(uint8_tLine,uint8_tColumn,uint32_tNumber,uint8_tLength);voidOLED_ShowCHinese(u8 Line,u8 Column,u8 no);#endifOLED_Font.h 代码如下#ifndef__OLED_FONT_H#define__OLED_FONT_H#includestm32f10x.h// Device header/*OLED字模库宽8像素高16像素*/constuint8_tOLED_F8x16[][16]{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 00x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 10x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 20x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 30x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 40xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 50x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,// 60x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 70x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 80x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 90x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 100x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,// 110x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 120x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 130x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 140x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 150x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 160x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 170x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 180x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 190x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 200x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 210x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 220x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 230x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 240x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 250x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 260x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 270x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,// 280x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,// 290x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,// 300x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 310xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,// 320x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 330x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 340xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 350x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 360x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 370x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 380xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 390x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 400x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 410x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 420x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 430x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 440x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 450x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 460xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 470x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 480xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 490x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 500x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 510x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 520x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 530x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 540xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 550x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 560x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 570x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 580x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 590x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 600x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 610x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 620x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 630x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 640x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 650x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 660x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 670x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 680x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 690x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 700x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 710x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 720x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 730x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 740x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 750x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 760x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 770x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 780x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 790x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 800x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 810x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 820x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 830x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 840x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 850x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 860x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 870x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 880x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 890x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 900x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 910x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 920x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 930x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94};//汉字charHzk[][32]{// 杭(0) 州(1){0x10,0x10,0xD0,0xFF,0x90,0x10,0x08,0xC8,0x49,0x4E,0x48,0xC8,0x08,0x08,0x00,0x00},{0x04,0x03,0x00,0xFF,0x00,0x83,0x60,0x1F,0x00,0x00,0x00,0x3F,0x40,0x40,0x78,0x00},/*杭,0*/{0x00,0xE0,0x00,0xFF,0x00,0x20,0xC0,0x00,0xFE,0x00,0x20,0xC0,0x00,0xFF,0x00,0x00},{0x81,0x40,0x30,0x0F,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,0xFF,0x00,0x00},/*州,1*/};#endif